4. 1901-Z1

The 1901-Z1 Wi-Fi Access Point is designed to be operated within a hazardous area.

  • ATEX Zone 1 or 2, IECEx, CSA and AEx certified Class I Zone 1 Wireless Access Point
  • No need for heavy, and expensive Ex d solution
  • Can be used as Access Point, Bridge or repeater
  • Fully configurable to meet statutory Wi-Fi requirements worldwide
  • Quick and easy set-up
  • Intrinsically safe antenna and Ethernet 10/100 Mbps ports
  • Inexpensive way to extend your WiFi network into a hazardous area.
1901-Z1 : 
TYPICAL EX CODE Ex II (2) G D
Ex e mb ib [ib Gb] IIB T4 Gb
Ex tb IIIB T135°C Db IP66 

Class I, Zone 1, AEx e mb ib [ib Gb] IIB T4 Gb
Zone 21 Ex tb IIIB T135°C Db IP66
Power Requirements 100 - 240V, 50/60Hz AC, current consumption 0.1A for 230V AC input, 0.2A for 120V AC input
Operating Temperature -40°C to +60°C (-40°F to +140°F)
Storage Temperature -40°C to +70°C (-40°F to +158°F)
Ingress Protection IP66 / NEMA 4X
Interface IS Ethernet and power via glands
IS antenna output
Maximum transmit output power 20dBm (100mW)
Receiver sensitivity
802.11g 54Mbps:  -73dBm
6Mbps:  -92dBm
802.11b 11Mbps:  -90dBm
1Mbps:  -95dBm
Radio Link Tri-band wireless Wi-Fi IEEE 802.11 b/g & Super AG
Radio data rate Up to 108Mbps ( Super AG mode)
Security 4/128 bit WEP, WPA-PSK, WPA2-PSK, IEEE 802.1X (RADIUS) authentication, MAC address filtering, SSID broadcast control
Weight & Size 5.4kg / 12lbs
232(h) x 202(w) x 111(d) mm (9.13 x 7.95 x 4.37 inches)

This is a typical Specification; if you have other requirements please Contact Us

  • WAP 1901
  • WAP 1901 - front 2
  • WAP 1901 - side
  • WAP 1901 - side 2
  • WAP 1901 - side 3
  • WAP 1901 - side 4
  • WAP 1901 - top